Filed under: Uncategorized
January 22, 2010 • 7:46 pm 0
Simpson Strong Wall
Simpson Steel Strong Wall
Description:
Simpson Strong-Tie has the lateral force resisting system to fit the project and help hold it together during a wind or seismic event. The code-listed shearwalls allow for narrow wall sections while providing high loads. The anchor tie down systems restrained at each floor level to provide the necessary load capacity and overturning resistance for mid-rise buildings.
Application:
Do not cut the Steel Strong-Wall® or enlarge existing holes. Doing so will compromise the performance of the wall. Do not use an impact wrench to tighten nuts on the anchor bolts. Maximum shim thickness between the Steel Strong-Wall and top plates or header is 7/8″ using Simpson Strong-Tie® Strong-Drive® 1/4″ x 3 1/2″ screws. Walls with 2×4 pre-attached studs may also be used in 2×6 wall framing. Install the wall flush to one face of the framing and add furring to the opposite side. Walls may be installed with solid or multi-ply headers
Availability:
Home Depot (Check your local Listing)
Filed under: Materials, Lateral Support, Wall System
January 22, 2010 • 5:55 pm 0
Tech Block
Tech Block
Description:
Tech Block is a stay-in-place insulated concrete form (icf). Its insulation is a composite of recycled polystyrene, cement, water, and admixtures. It is faced with 7/16″ Oriented Strand Board. Tech Block forms are a screen-grid icf, creating a steel reinforced, concrete post-and-beam structure, once rebar and grout are placed.
Tech Block is Highly Insulating: Each form can have an approximate R-value of 47.5 per ASTM C1363 and ASTM C518-04. The concrete within Tech Block is surrounded by insulation, preventing thermal bridging. The composite material is not subject to settling, or degradation.
Installation:
Tech Block Installs Easily: The form’s facing allows for easy bracing anywhere on the wall. The facing overlaps from form to form to help keep walls aligned. Ledgers and bucks can be screwed into the facing and held in place securely before grout placement. Tech Block forms create a quiet, strong structure. The patented facing allows for a lifetime of remodeling options. Unfaced forms can be used below grade, allowing for highly insulated basements and foundation walls.
Availability:
Tech Blocks are stretch-wrapped on oversized wood pallets to provide for easier loading and unloading and to insure proper stability during transportation. The pallets can be easily unloaded using a standard loader or fork lift. Each pallet holds 24 to 28 blocks.
Info@Techblock.com
http://www.techblock.com/
Cost:
Tech Block is, by far, the most cost effective Composite ICF on the market. Our average block price is $14 per block.
Actual pricing will vary depending on shipment location.
Filed under: Materials, Cost Efficient, Wall System
January 22, 2010 • 8:34 am 0
Accelerated Building Technologies – S.T.E.P. Steel Thermal Efficient Panel
The accel-E™Steel Thermal Efficient Panel (S.T.E.P.). Wall System
Description:
The accel-E™ Steel Thermal Efficient Panel (S.T.E.P.) wall system combines the strength and performance of cold-formed steel framing with the superior insulation properties of expanded polystyrene (EPS) using the exclusive Plastbau® manufacturing process. All steel used in the accel-E™ STEP system is galvanized to industry standards to prevent rust.
This innovative technology virtually eliminates the transfer of temperature from one side of the framing component to the other side. The result is a thermally efficient, high-performance building technology that is strong, lightweight, energy efficient and economical.
With the development of the accel-E™ STEP wall system, Accelerated Building Technologies has created a cost-effective, energy-efficient and structurally superior building alternative to conventional wood framing, insulation and sheathing.
Contact:
Accelerated Building Technologies, LLC.
1550 Coraopolis Heights Road
Moon Township, Pennsylvania 15108
Telephone: 888-9-accelE (888-922-2353)
Fax: 412-490-5066
Email: info@accel-E.com
Pricing:
1) Pre-cut openings for faster and more accurate installation of doors and windows2) Panels are delivered directly to the job site ready for installation3) Panels are pre-cut to size reducing waste and time
4) Enhanced energy efficiency improves design options
5) Light weight eliminates heavy equipment scheduling
January 22, 2010 • 7:56 am 0
Bendheim Wall Systems – Channel Glass
Bendheim Wall Systems – Channel Glass
Description:
A translucent U-shaped cast glass produced in several widths ranging from 9″ – 19″ and lengths to 23 feet. The basic ingredients of LINIT channel glass are – sand, lime, soda, and carefully recycled glass. The mix is combined in a highly sophisticated oxygen-fired melting furnace to emerge as a ribbon of high quality molten glass. It is then drawn over a series of steel rollers to form a continuous glass channel of specific dimensions and surface finish. The endless ribbon of channel glass is carefully cooled and cut prior to custom processing and packaging for dispatch.
Availability:
See Above
Contact:
Bendheim Wall Systems
61 Willett Street
Passaic, NJ 07055
(800) 221-7379
Pricing:
Contact Bendheim Wall Systems
Contact Information Above.
Weather:
http://www.bendheimwall.com/wall-glass-performance.htm
Brochure:
Click to access Bendheim_Wall_Systems_Product_Brochure.pdf
Filed under: Materials, recycled glass, translucent, Wall System
January 22, 2010 • 7:38 am 0
Superior Walls – R5
R5
Description:
The R-5 is the original Superior Wall that revolutionized new home foundations across the country. Builders and homeowners alike trust the R-5 to keep their basements warm and dry through the harshest conditions. The original Superior Wall is designed to be warm right from the factory and is provided with 1 inch of continuous DOW ® insulation for year-round comfort and energy efficiency. The special high-strength, low-water concrete mix ensures that your basement remains dry and the wall is reinforced with steel rebar and polypropylene fibers for strength.
Convenient features include built-in accesses for wiring and small plumbing, stud facing for easy drywall installation and custom openings for windows and doors. The R-5 wall has been proven superior by numerous scientific tests and has been the foundation of choice for satisfied new home owners across the country for energy efficient homes.
Availability:
Superior Walls R5 panels are available in heights of 4’-0”, 4’-8”, 8’-2”, 9’-0”, and 10’-0” and in custom lengths to suit project. The max. axial load is 5500 lbs/lft. Special point loads up to 40,000 can be accommodated.
Pricing:
Call for custom pricing
Weather:
1” Dow Extruded Polystyrene Insulation
R-5 Build In
Up to R-50 Optional on Site
Warmer in winter, cooler in summer…reduces home energy costs
Filed under: Materials, insulation, Wall System
Woodbury / Ari Bhod Design Build Studio 